Description
Bert’s BEC 2.0 Profile Pack
Introduction
This profile pack is a detailed sound recreation of the Bogner Ecstasy Classic, one of my all-time favourite amplifiers. It combines a stunning Fender-like clean with Marshall-inspired crunch and gain — all in one iconic amp.
The pack contains two types of profiles:
- Bert’s Choice (BC) — 45 finished profiles, dialled in to my personal taste. Ready to play.
- DI — 43 raw, unprocessed profiles. Shape them yourself.
Compatibility
| Device | Supported |
| Kemper Profiler MK2 + OS14 | ✅ Full quality |
| Kemper Stage MK2 + OS14 | ✅ Full quality |
| Kemper Player + OS14 (Level II or III upgrade) | ✅ Full quality |
| Kemper Profiler MK1 | ⚠️ Loads, but reduced resolution |
Note on MK1: These are 2.0 profiles, capturing 100,000+ frequency points per profile. A MK1 unit cannot render this level of detail in full — comparable to playing 4K video on an HD screen. The profiles will load and play, but won’t reach their full potential. New 2.0 features are not available on MK1.
Please note: 2.0 profiles have a lower output level than classic MK1 profiles. You may need to adjust the volume on your profiler or within the rig accordingly.
Channels
The pack covers all three channels of the Bogner Ecstasy Classic:
| Code | Channel | Character |
| grn | Green | Clean — Fender-like warmth and clarity |
| blue | Blue | Crunch — Marshall-inspired bite and dynamics |
| red | Red | Gain — High-gain with rich harmonics |
Voicing Options
Excursion Type
Controls the fundamental feel and structure of the sound.
| Code | Type | Character |
| T | Tight | Focused, punchy response |
| M | Medium | Balanced feel |
| L | Loose | Open, dynamic response |
Pre-EQ
Three pre-EQ voicings per channel.
| Code | Setting | Character |
| N | Normal | Neutral, balanced tone |
| B1 | Bright | Added top-end presence |
| B2 | Bright 2 | Even brighter, more air and sparkle |
Plexi Mode
Available on the Blue and Red channels only. Adds a vintage plexi-style voicing.
| Code | Option |
| plex | Plexi mode active |
Boost
A boost option is available on all channels where applicable. Indicated in the profile name where used.
| Code | Option |
| BST | Boost active |
Profile Naming Convention
Profile names follow a consistent structure so you always know exactly what you’re loading:
[Amp] [Channel] [Plexi/BST] [Excursion] [PreEQ] [Variant]
| Segment | Description | Example values |
| [Amp] | Amp name abbreviation | BM/BEC |
| [Channel] | Amp channel | grn, blue, red |
| [Plexi/BST] | Plexi mode or Boost — only when active (Blue/Red only for Plexi) | plex, BST or omitted |
| [Excursion] | Excursion type | T, M, L |
| [PreEQ] | Pre-EQ setting | N, B1, B2 |
| [Variant] | Tweaked variations of the same base setting | A, B, C… or omitted |
Examples
| Profile name | Meaning |
| BM/BEC grn M N A | Green channel, Medium, Normal EQ, Variant A |
| BM/BEC blue M B1 | Blue channel, Medium, Bright 1 |
| BM/BEC blue plex M B1 B | Blue channel, Plexi mode, Medium, Bright 1, Variant B |
| BM/BEC red BST L B2 A | Red channel, Boost, Loose, Bright 2, Variant A |
| BM/BEC red plex M B1 B | Red channel, Plexi mode, Medium, Bright 1, Variant B |
Variants (A, B, C…) indicate profiles built on the same base settings but with different tweaks applied — for example, alternative cab choices, EQ adjustments, or different gain staging. Always start with the un-lettered version as your reference point, then explore the variants.
Tips for Getting the Best Results
- Start with Bert’s Choice profiles to get a finished, playable sound immediately.
- Use DI profiles if you want full control over cab, EQ, and character from scratch.
- Plexi mode on the Blue and Red channels adds vintage character — great for classic rock tones.
- Variants A, B, C are explorations of the same base setting. If the main profile feels close but not quite right, try the variants.
- On MK2/OS14, the full resolution of 2.0 profiling is active — you’ll hear the difference in dynamics, feel, and harmonic detail.
- I’d recommend creating a dedicated BM/BEC 2.0 folder in your local library and importing all the profiles there first. From there you can take your time auditioning everything, pick the profiles you actually want to use, and then rename or move them into your profiler at your own pace — no pressure to deal with the full pack at once.
- 2.0 profiles have a lower output level than MK1 profiles. You may need to adjust the volume on your profiler or within the rig to match your preferred level.
About This Pack
Created by Bert Meulendijk
Format: Kemper 2.0 Profile Pack
Enjoy this BM/BEC 2.0 pack!
